FLUKE 5500A COIL SPECS

I like this series over the QRX-7,8 & 9001 because IMO, their better. The5500A/5520A Multi-Product Calibrators Calibration solutions that match your workload and budget. Enter the LCR reading into the 5500A when prompted. AC Current Use a Fluke 5790A or equivalent with the appropriate precision shunts and adapter to measure the 5500A output.

290 M 1 0.403% 1 Perform this test using the HP 3458A in the 10 M range and the Fluke 742A-10M in parallel with the 5500A output. If the 5500A is the location of the ground reference point in a system, this binding post can be used for connecting other instruments to earth ground. 5500/CAL is a special version of our MET/CAL Plus Calibration Software Package designed to work with the 5500A and a Fluke 45 DMM. 5500A Black and White Extended Specifications Fluke Corporation 1 5500A Specifications The following paragraphs detail specifications for the 5500A Calibrator. 5500A/COIL Instruction Sheet rus 1.8 MB.

GE Universal Remote Control. Get the Fluke 5500A Power Sources / Calibrators for rent or lease at TRS-RenTelco with 24/7 customer support. Rules of Operation Whenever boost key annunciator is on, 5725A voltage boost or current boost amplifier is in use. The Fluke 5500A with additional options, allows Oscilloscope Calibration to 600MHz. For almost everything you do with the 5500A, your hand moves. Now we can look at the 2-Wire Adder formula. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples and RTDs. This item will ship to United States, but the seller has not specified shipping options.

For example, if the 5500A has been turned off for 5 minutes. Rent, lease or buy the Multifunction Calibrator Fluke 5500A/SC/CAL from Livingston. Fluke multi-product calibrators can meet your needs with one compact, affordable tool. If you need to calibrate digital multimeters, clamps, thermometers and other electronic test instruments to comply with quality standards, the Fluke Calibration 5502E offers an accurate and economical solution.

• You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated.
• Link on another website Social Media Search engine Suggested by a friend Advertisement Other.
• Multi-Product Calibrator The 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load.
• These include dc and ac voltages up to 1020 V, dc and ac current up to 20.5 A directly or 1025 A using the 5500A/COIL 50-turn current coil accessory and variable resistances up to 1100 M.
• DISCLAIMER, This site is not an official US Air Force site, it is intended for private use only.
• Example programs are included with most instrument driver downloads.

For this test, measure the dc output at the 5500A front panel TC connector with a dc meter observe polarity on the TC connector . Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous vo. 5500A-8001 may also be known as the following names. Fluke 5520A with Fluke 5500/Coil works fine. All in all it was interesting to disassemble it, but of course it doesnt come close to a Fluke 57XX Calibrator with all its shielding and TaN-Resistornetworks.

5520A High Performance Multi-Product Calibrators, Fluke Cal.

5500A and the enhanced performance 5520A to calibrate nearly all your oscilloscopes fully up to 600 MHz. Footnotes for the secondary specs are the same as above and like above I can ignore it all together.

NCSL Z540.

The Fluke 5500A Calibrator addresses a wide cross section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate. Plus you can import the data into Fluke DMS to process and generate certificates. The Fluke 5520A multi-product calibrator has been upgraded to the 5522A. It sources DC and AC Volts as well as DC and AC current. The Calibrator s 1 year specification at 4 Amps is 0.06% + 2 mA , so the effective current in the coil bundle will have a specification of 0.06% + 0.1A . What is the procedure to be followed for Fluke 8508A Function Zero & Range Zero ?

Questions regarding Service, General Metrology, Certificates of Calibration or if you are in need of Technical Support can be submitted via our Support Request form. Fluke Calibration Products and Services Short Form Catalog. 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. Improved specifications that will help you increase. Specifications apply for max resolution in each function, normal mode 2 Assumes 4 hour warm-up period.